Experiments for specific heat [J/(kg K)], or heat capacity, were conducted using a heat flow meter on unconditioned and dried samples at 10 °C, 20 °C, 30 °C and 40 °C.

Experiments for thermal conductivity [W/(m K)] were conducted using a heat flow meter on unconditioned and dried samples at 15 °C and either 45 °C or 65 °C.

Mass loss rate [kg/s] was measured in cone calorimeter experiments at three heat fluxes: 25 kW/m², 50 kW/m², and 75 kW/m².

Experiments for heat release per unit area [kW/m²] were conducted on samples conditioned at 20°C and 50% relative humidity using a cone calorimeter at three different heat fluxes: 25 kW/m², 50 kW/m², and 75 kW/m².

Carbon monoxide yield was measured during cone calorimeter experiments conducted at heat fluxes of 25 kW/m², 50 kW/m², and 75 kW/m².

Experiments for specific heat release rate [W/g], were conducted using a micro-scale combustion calorimeter at a heating rate of 30 K/min.

Soot yield [g/g] was calculated from smoke obscuration data collected in cone calorimeter experiments conducted at heat fluxes of 25 kW/m², 50 kW/m², and 75 kW/m².

Effective heat of combustion [MJ/kg] is calculated from data collected in both micro-scale combustion calorimeter experiments and cone calorimeter experiments.

Band averaged emissivity was calculated from reflectance measurements conducted with an integrating sphere and Fourier transform infrared spectrometer.